Water Pump

WATER PUMP ASSEMBLY






(a) Install a new O-ring to the water by-pass pipe.
(b) Apply soapy water to the O-ring.
(c) Connect the water pump to the water by-pass pipe end.
(d) Temporarily install the water pump and a new gasket with the 5 bolts, 2 stud bolts and nut. Uniformly tighten the bolts, stud bolts and nut in several passes.

For Bolt
Torque: 21 Nm (214 kgf-cm, 16 ft-lbf)

For Stud bolt, nut
Torque: 18 Nm (183 kgf-cm, 13 ft-lbf)