Crankshaft Main Bearing

Maximum circle runout:
0.06 mm (0.0024 in.)

Standard journal diameter:
60.988 to 61.00 mm (2.4011 to 2.4016 in.)

Maximum taper and out-of-round:
0.02 mm (0.0008 in.)

Standard crank pin diameter:
52.992 to 53.000 mm (2.0863 to 2.0866 in.)

Maximum taper and out-of-round:
0.02 mm (0.0008 in.)

CRANKSHAFT BEARING CAP SET BOLT

Standard diameter:
10.8 to 11.0 mm (0.4252 to 0.4331 in.)
Minimum diameter:
10.70 mm (0.4213 in.)
Measuring Point:
40 mm (1.57 in.)

CRANKSHAFT THRUST CLEARANCE

Standard thrust clearance:
0.04 to 0.24 mm (0.0016 to 0.0094 in.)
Maximum thrust clearance:
0.30 mm (0.0118 in.)

Standard thrust washer thickness:
2.43 to 2.48 mm (0.0957 to 0.0976 in.)

Standard Crankshaft Oil Clearance:
0.026 to 0.047 mm (0.0010 to 0.0019 in.)
Maximum oil clearance
0.050 mm (0.0020 in.)

Main Bearing Caps

Bottom Main Bolts

Step 1:




Torque: 61 Nm (622 kgf-cm, 45 ft-lbf) in illustrated sequence.

Step 2:




Tighten the bearing cap bolts another 90° in the order shown in step 1.


Side Main Bolts





Torque: 52 Nm (530 kgf-cm, 38 ft-lbf) in illustrated sequence.


Bolt length:

Bottom Main Bolts




100.0 to 102.0 mm (3.937 to 4.016 in.)





105.5 to 107.5 mm (4.154 to 4.232 in.)

Side Main Bolts




45 mm (1.77 in.) for bolt A
30 mm (1.18 in.) for except bolt A