Removal

AIR CONDITIONING: AIR CONDITIONING PANEL (for Automatic Air Conditioning System): REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER Removal

3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER Removal

4. REMOVE RADIO RECEIVER Removal

5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY






(a) Remove the 2 screws.
(b) Using a screwdriver, detach the 3 clips.
HINT: Tape the screwdriver tip before use.

(c) Connect the connectors and remove the air conditioning control.