Crankshaft Main Bearing

CRANKSHAFT

Step 1:





for inside position - Torque: 61 Nm (622 kgf-cm, 45 ft-lbf)
for outside position - Torque: 27 Nm (275 kgf-cm, 20 ft-lbf)

Step 2:





Mark the front of the bearing cap bolts with paint.
Tighten the bearing cap bolts 90° in the order shown in step 1.
Check that the painted marks are now at a 90° angle to the front.

CRANKSHAFT

Maximum circle runout:
0.06 mm (0.00236 in.)

Standard journal diameter:
66.988 to 67.000 mm (2.6373 to 2.6378 in.)

Maximum taper and out-of-round:
0.02 mm (0.000787 in.)

CRANKSHAFT BEARING CAP SET BOLT

Measuring point:
54.5 mm (2.15 in.)

Standard Diameter:




Minimum Diameter:




CRANKSHAFT THRUST CLEARANCE

Standard thrust clearance:
0.020 to 0.220 mm (0.000787 to 0.00866 in.)
Maximum thrust clearance:
0.30 mm (0.0118 in.)
Standard thrust washer thickness:
2.44 to 2.49 mm (0.0961 to 0.0980 in.)

CRANKSHAFT OIL CLEARANCE

Standard Oil Clearance:




Maximum Oil Clearance: