Installation

SEAT: LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Driver Seat): INSTALLATION

INSTALLATION
CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands.

1. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (for Driver Side)

(a) Install the lumbar support adjuster with the 2 screws.
(b) Connect the lumbar support adjuster connector.

(c) Attach the 4 hooks to install the seatback spring.
(d) Install the 4 springs.
2. INSTALL SEATBACK COVER WITH PAD
(a) Install the seatback cover with pad to the seatback frame.

(b) Install the seatback cover bracket to the seat frame with the nut.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
CAUTION: After the seatback trim cover is assembled, make sure the side airbag strap is not twisted.

(e) Connect the seat heater connector and attach the 2 wire harness clamps.
3. INSTALL FRONT SEAT HEADREST SUPPORT Reassembly

4. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH Reassembly

5. INSTALL FRONT INNER SEAT CUSHION SHIELD LH Reassembly

6. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH Installation

7. INSTALL FRONT SEAT CUSHION SHIELD LH Disassembly

8. INSTALL RECLINING POWER SEAT SWITCH KNOB Reassembly

9. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB Reassembly

10. INSTALL FRONT SEAT ASSEMBLY LH
(a) Install the front seat assembly Installation.