Installation

BRAKE CONTROL: REAR SPEED SENSOR: INSTALLATION

INSTALLATION





1. INSTALL REAR SPEED SENSOR
(a) Install the rear speed sensor with the nut.
Torque: 8.3 Nm (85 kgf-cm, 73 in-lbf)
NOTE: Make sure that the sensor tip is clean.

(b) Connect the skid control sensor wire.
2. INSTALL REAR WHEEL
Torque: 112 Nm (1,137 kgf-cm, 82 ft-lbf)
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)
4. CHECK VSC SENSOR SIGNAL
Test Mode Procedure