CAN Communication System
TERMINALS OF ECUHINT: This section describes the standard CAN values for all CAN related components.
1. CAN J/C
Terminals Of Control Module / Pinouts:
a. Access cab, standard cab.
HINT:
- The connectors connected to the CAN J/C can be distinguished by the colors of the bus lines and the connecting side of the connector.
- J69, J70, and J71 are interchangeable.
- J68 and J72 are interchangeable.
Terminals Of Control Module / Pinouts:
b. Double cab.
HINT:
- The connectors connected to the CAN J/C can be distinguished by the colors of the bus lines and the connecting side of the connector.
- J76, J77, J78 and J79 are interchangeable.
c. The terminals of the CAN J/C connector.
1. Access cab, standard cab
2. Double cab
d. Measure the resistance according to the value(s) in the table.
HINT:
- *1: Access cab, standard cab
- *2: Double cab
2. DLC3
a. Measure the resistance according to the value(s) in the table.
HINT:
- *1: Access cab, standard cab
- *2: Double cab
3. Skid Control ECU
a. Measure the resistance according to the value(s) in the table.
HINT:
- *1: Access cab, standard cab
- *2: Double cab
4. Steering Angle Sensor
a. Measure the resistance according to the value(s) in the table.
HINT:
- *1: Access cab, standard cab
- *2: Double cab
5. Yaw Rate and Deceleration Sensor
a. Measure the resistance according to the value(s) in the table.
HINT:
- *1: Access cab, standard cab
- *2: Double cab
6. ECM
a. Measure the resistance according to the value(s) in the table.
b. Measure the resistance according to the value(s) in the table.
HINT:
- *1: Access cab, standard cab
- *2: Double cab