Courtesy Lamp: Testing and Inspection

INSPECT FRONT DOOR COURTESY LAMP SWITCH ASSEMBLY
a. Check the resistance.
1. Measure the resistance using an ohmmeter, and check the results in accordance with the value(s) in the table.
If the result is not as specified, replace the front door courtesy lamp switch assembly.




INSPECT REAR DOOR COURTESY LAMP SWITCH ASSEMBLY
a. Check the resistance.
1. Measure the resistance using an ohmmeter, and check the results in accordance with the value(s) in the table.
If the result is not as specified, replace the rear door courtesy lamp switch assembly.







INSPECT ROOM LAMP ASSEMBLY NO.1
a. Check the resistance.
1. Measure the resistance using an ohmmeter, and check the results in accordance with the value(s) in the table.
If the result is not as specified, replace the room lamp assembly.

b. Check the lamp operation.
1. Connect the battery positive (+) lead to terminal 1 and the battery negative (-) lead to terminal 2, then check that the lamp comes on when the switch is in the DOOR position.

Standard: Lamp comes on.

If the lamp does not come on, replace the bulb.

2. Connect the battery positive (+) lead to terminal 1 and the battery negative (-) lead to terminal 3, then check that the lamp comes on when the switch is in the ON position.

Standard: Lamp comes on.

If the lamp does not come on, replace the bulb.