Ball Joint

FRONT LOWER BALL JOINT

LOWER ARM SUB ASSEMBLY BALL JOINT FRONT LH
Using a torque wrench, turn the nut continuously at a rate of 3 - 5 seconds per 1 turn and take the torque reading on the 5th turn.

Turning torque wear limit 0.98 - 3.43 Nm (10 - 35 kgf-cm, 8.7 - 30 inch lbs.)



LOWER ARM SUB ASSEMBLY BALL JOINT FRONT LH
Install the lower ball joint assembly front LH and tighten the nut.

Castle Nut Torque 123 Nm (1,250 kgf-cm, 91 ft. lbs.)