Installation

REAR DIFFERENTIAL CARRIER








COMPONENTS

INSTALLATION
1. INSTALL DIFFERENTIAL CARRIER ASSEMBLY
a. Install a new gasket.
b. Install the differential carrier assembly with the 10 washers and nuts.

NOTICE: Be careful not to damage the installation surface.

Torque: 73 Nm (740 kgf-cm, 54 ft. lbs.)
2. CONNECT REAR PROPELLER SHAFT
2WD: See Propeller Shaft Installation Installation
4WD: See Propeller Shaft Installation Installation
3. INSTALL REAR AXLE SHAFTS
4. FILL DIFFERENTIAL WITH HYPOID GEAR OIL