Front Seat Assembly

REMOVAL

1. REMOVE SEAT TRACK OUTER COVERS
Using a screwdriver, remove the 4 seat track outer covers.

HINT: Tape up the screwdriver tip before use.

2. REMOVE FRONT SEAT
a. Remove the 4 bolts.

Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)

b. Disconnect the connectors, then remove the front seat.

NOTE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
- Be careful not to damage the body.



INSTALLATION
Installation is in the reverse order of removal.