Removal and Installation

COMPONENTS

REMOVAL
1. DRAIN ENGINE COOLANT FROM RADIATOR

HINT: It is not necessary to drain out all the coolant.

2. DISCONNECT WATER HOSES FORM HEATER RADIATOR PIPE
a. Grip the claws of the hose clip and slide the hose clip along the hose.
b. Disconnect the water hoses.






HINT: At the time of installation, please refer to the following items.
^ Push the water hose as for as second ridge on the pipe and install the hose clip.
^ Install the hose clip in the position, as shown in the illustration.

3. REMOVE COOLING UNIT
4. REMOVE INSTRUMENT PANEL AND REINFORCEMENT
5. REMOVE HEATER UNIT




a. Remove the rear heater duct.




b. Remove the 2 nuts and heater unit.

INSTALLATION
Installation is in the reverse order of removal.