Power Steering Pump

SERVICE SPECIFICATIONS
Oil Clearance Between Pump Shaft And Bushing:
Standard 0.03-0.05 mm (0.0012-0.0020 inch)
Maximum 0.07 mm (0.0028 inch)
Vane Plate:
Height:
Minimum 8.1 mm (0.319 inch)
Thickness:
Minimum 1.797 mm (0.07075 inch)
Length:
Minimum 14.988 mm (0.59008 inch)
Vane Plate And Pump Rotor Groove Clearance:
Maximum 0.03 mm (0.0012 inch)
Vane Length:
Pump Rotor And Cam Ring Mark:
None 14.996-14.998 mm (0.59039-0.59047 inch)
1 14.994-14.996 mm (0.59031-0.59039 inch)
2 14.992-14.994 mm (0.59024-0.59031 inch)
3 14.990-14.992 mm (0.59016-0.59024 inch)
4 14.988-14.990 mm (0.59008-0.59016 inch)
Spring Free Length:
Minimum 36 mm (1.42 inch)
Pump Rotating Torque:
Maximum 0.3 Nm (2.4 inch lbs.) Or Less

TORQUE SPECIFICATIONS
Pressure Feed Tube To Control Valve Housing:
With Special Service Tool (SST) 36 Nm (26 ft. lbs.)
Less SST 44 Nm (32 ft. lbs.)
Drive Belt Adjusting Bolt 43 Nm (32 ft. lbs.)
PS Vane Pump Assembly Set Bolt 43 Nm (32 ft. lbs.)
Bracket Set Bolt 43 Nm (32 ft. lbs.)
Union Bolt To:
Pressure Feed Tube 51 Nm (38 ft. lbs.)
Pressure Feed No.2 Tube 69 Nm (51 ft. lbs.)
Vane Pump Pulley Set Nut 43 Nm (32 ft. lbs.)
Air Control Valve 36 Nm (27 ft. lbs.)
Suction Port Union Set Bolt 13 Nm (108 inch lbs.)
Pressure Port Union 69 Nm (51 ft. lbs.)
Tube Clamp Set Bolt 13 Nm (108 inch lbs.)