Evaporator Core: Service and Repair

REMOVAL
1. REMOVE COOLING UNIT

2. REMOVE EVAPORATOR
a. Using a knife, cut off each packing.
b. Remove the 4 screws and 3 clips, then separate the cooling unit case.
c. Remove the evaporator.

HINT: At the time of installation, please refer to the following item.
If evaporator is replaced, add compressor oil to evaporator.
Add 40 cc (1.4 fl.oz.)
Compressor oil: ND-OIL 8 or equivalent

INSTALLATION
Installation is in the reverse order of removal.