Service Hints

C3 CRUISE CONTROL ACTUATOR
3-4: Approx. 38 Ohms

C12 CRUISE CONTROL SW [COMB. SW]
5-4: Continuity with the CRUISE SW ON
Approx. 1540 Ohms with the CANCEL SW ON
Approx. 630 Ohms with the SET/COAST SW ON
Approx. 240 Ohms with the RESUME/ACCEL SW ON

C16 CRUISE CONTROL ECU
9-GROUND: Approx. 12 Volts with the ignition SW at ONposition
12-GROUND: 4 pulses with 1 rotation of the rotor shaft
10-GROUND: Approx. 1540 Ohms with the CANCEL SW ON in the control SW
Approx. 630 Ohms with the SET/COAST SW ON in the control SW
Approx. 240 Ohms with the RESUME/ACCEL SW ON in the control SW
16-GROUND: Always continuity