Removal and Installation

REMOVAL

NOTE: Before changing the starter, check the following items again:
^ Connector connection
^ Accessory installation, e.g.: theft deterent system




REMOVE STARTER
a. Disconnect the starter connector.
b. Remove the nut, and disconnect the starter wire.
Torque: 8.8 N.m (90 kgf.cm, 70 in.lbf)

c. Remove the 2 bolts and starter.
Torque: 39 N.m (400 kgf.cm, 29 ft.lbf)

INSTALLATION
Installation is in the reverse order of removal.