Alignment

SERVICE SPECIFICATIONS
Vehicle Height

NOTE:
^ Vehicle Height:
Front: A - B
Rear: C - D
^ Measuring Points:
(A): Ground clearance of spindle center.
(B): Ground clearance of lower suspension arm bolt center.
(C): Ground clearance of leaf spring front bushing center.
(D): Ground clearance of axle shaft center.

Model VCK21L-TRMDKA P235/75R 15
Front 38.5 mm (1.516 inch)
Rear 72.3 mm (2.846 inch)
Model VCK21L-TRMDKA P265/70R 16
Front 38.5 mm (1.516 inch)
Rear 74.0 mm (2.913 inch)
Model VCK21L-TRSDKA P235/75R 15
Front 40.2 mm (1.583 inch)
Rear 71.1 mm (2.799 inch)
Model VCK21L-TRSDKA P265/70R 16
Front 40.2 mm (1.583 inch)
Rear 72.8 mm (2.866 inch)
Model VCK21L-CRM*KA P235/75R 15
Front 32.5 mm (1.280 inch)
Rear 79.4 mm (3.126 inch)
Model VCK21L-CRM*KA P265/70R 16
Front 32.5 mm (1.280 inch)
Rear 81.6 mm (3.213 inch)
Model VCK21L-CRS*MA P235/75R 15
Front 32.5 mm (1.280 inch)
Rear 78.3 mm (3.083 inch)
Model VCK21L-CRS*MA P265/70R 16
Front 32.5 mm (1.280 inch)
Rear 80.6 mm (3.173 inch)

Camber
STD Cab 0°40' ± 45' (0.66° ± 0.75°)
Extra Cab 0°35' ± 45' (0.59° ± 0.75°)
Left-Right Error 45' (0.75°) or less

Caster
STD Cab 1°05' ± 45' (1.09° ± 0.75°)
Extra Cab 0°55' ± 45' (0.92° ± 0.75°)
Left-Right Error 45' (0.75°) or less
Steering Axis Inclination 12°00' ± 45' (12° ± 0.75°)
Left-Right Error 45' (0.75°) or less

Toe-In (Totals)
STD Cab:
Degrees 0°12' ± 12' (0.2° ± 0.2°)
Linear 2.7 ± 2 mm (0.11 ± 0.08 inch)
Extra Cab:
Degrees 0°0.08' ± 12' (0.14° ± 0.2°)
Linear 1.9 ± 2 mm (0.08 ± 0.08 inch)

Wheel Angle (Maximum)
STD Cab:
Inside Wheel 32°45'
Outside Wheel (Reference) 30°31'
Extra Cab:
Inside Wheel 33°07'
Outside Wheel (Reference) 30°31'