Alignment

SERVICE SPECIFICATIONS
Vehicle Height

NOTE:
^ Vehicle Height:
Front: A - B
Rear: C - D
^ Measuring Points:
(A): Ground clearance of spindle center.
(B): Ground clearance of lower suspension arm bolt center.
(C): Ground clearance of rear axle shaft center.
(D): Ground clearance of leaf spring front hanger pin center.

Model RCK10L-TRMRKA P215/75R 15
Front 45.4 mm (1.787 inch)
Rear 60.9 mm (2.398 inch)
Model RCK10L-TRMRKA P235/75R 15
Front 45.4 mm (1.787 inch)
Rear 59.9 mm (2.358 inch)
Model RCK10L-TRSRKA P215/75R 15
Front 45.4 mm (1.787 inch)
Rear 61.8 mm (2.433 inch)
Model RCK10L-TRSRKA P235/75R 15
Front 45.4 mm (1.787 inch)
Rear 60.9 mm (2.398 inch)
Model VCK11L-TRMDKA P235/75R 15
Front 48.0 mm (1.890 inch)
Rear 60.7 mm (2.390 inch)
Model VCK11L-TRMDKA P215/75R 15
Front 48.0 mm (1.890 inch)
Rear 61.6 mm (2.425 inch)
Model VCK11L-THMDKA (1 ton)
Front 49.3 mm (1.940 inch)
Rear 34.9 mm (1.374 inch)
Model VCK11L-TRSDKA P215/75R 15
Front 49.9 mm (1.965 inch)
Rear 62.9 mm (2.476 inch)
Model VCK11L-TRSDKA P235/75R 15
Front 49.9 mm (1.965 inch)
Rear 62.0 mm (2.441 inch)
Model VCK11L-THSDKA (1 ton)
Front 49.9 mm (1.965 inch)
Rear 35.7 mm (1.406 inch)
Model VCK11L-CRMDKA P215/75R 15
Front 38.8 mm (1.528 inch)
Rear 45.3 mm (1.783 inch)
Model VCK11L-CRMSKA P235/75R 15
Front 38.8 mm (1.528 inch)
Rear 45.6 mm (1.795 inch)
Model VCK11L-CRSDKA P235/75R 15
Front 38.8 mm (1.528 inch)
Rear 45.3 mm (1.783 inch)
Model VCK11L-CRSDKA P215/75R 15
Front 38.8 mm (1.528 inch)
Rear 46.2 mm (1.819 inch)
Model VCK11L-CRSSKA P235/75R 15
Front 38.8 mm (1.528 inch)
Rear 46.5 mm (1.831 inch)
Model VCK11L-CRMDKA P235/75R 15
Front 38.8 mm (1.528 inch)
Rear 44.3 mm (1.774 inch)

Camber
STD Cab (1/2 ton) 0°24' ± 45' (0.4° ± 0.75°)
STD Cab (1 ton) 0°22' ± 45' (0.37° ± 0.75°)
Extra Cab 0°28' ± 45' (0.47° ± 0.75°)
Left-Right Error 45' (0.75°) or less

Caster
STD Cab (1/2 ton) 2°24' ± 45' (2.4° ± 0.75°)
STD Cab (1 ton) 1°40' ± 45' (1.68° ± 0.75°)
Extra Cab 2°04' ±45' (2.06° ± 0.75°)
Left-Right Error 45' (0.75°) or less

Steering Axis Inclination
STD Cab (1/2 ton) 12°05' ± 45' (12.08° ± 0.75°)
STD Cab (1 ton) 12°10' ± 45' (12.17° ± 0.75°)
Extra Cab 12°00' ± 45' (12° ± 0.75°)
Left-Right Error 45' (0.75°) or less

Toe-In (Total)
STD Cab (1/2 ton):
Degrees 0°11' ± 12' (0.19° ± 0.2°)
Linear 2.4 ± 2 mm (0.09 ± 0.08 inch)
STD Cab (1 ton):
Degrees 0°33' ± 12' (0.55° ± 0.2°)
Linear 7.0 ± 2 mm (0.28 ± 0.08 inch)
Extra Cab:
Degrees 0°20' ± 12' (0.33° ± 0.2°)
Linear 6.1 ± 2 mm (0.24 ± 0.08 inch)
Rack End Length Difference 3.0 mm (0.118 inch) or less

Wheel Angle
STD Cab (1/2 ton):
Inside Wheel 40°40' ± 2°
Outside Wheel 35°06'
STD Cab (1 ton):
Inside Wheel 40°23' ± 2°
Outside Wheel 35°19'
Extra Cab:
Inside Wheel 40°50' ± 2°
Outside Wheel 35°41'
Left-Right Error 30' or less