Differential, Transfer Case

SERVICE SPECIFICATIONS
Ring Gear:
Backlash 0.13-0.18 mm (0.0051-0.0071 in.)
Runout:
Maximum 0.1 mm (0.004 in.)

TORQUE SPECIFICATIONS
Differential Lock Shift Fork Shaft To:
Shift Fork Shaft 16 N.m (12 ft. lbs.)
Differential Lock Indicator Switch 40 N.m (30 ft. lbs.)
Ring Gear Mounting Case To:
Transfer Ring Gear 97 N.m (71 ft. lbs.)
Transfer Pinion Bearing Cage Lock Nut:
*Maximum 214 N.m (158 ft. lbs.)

* If the maximum torque is exceeded while tightening nut, replace the bearing spacer and repeat the preload procedure. Do not back off the pinion nut to reduce the preload.