Differential, Manual Transaxle
SERVICE SPECIFICATIONSDifferential Pinion To Side Gear Backlash:
Standard 0.05-0.20 mm (0.0020-0.0079 in.)
No.1 Differential Case Inner Diameter:
Standard 104.000-104.035 mm (4.0945-4.0959 in.)
Maximum 104.060 mm (4.0969 in.)
No.2 Differential Case Inner Diameter:
Standard 97.000-97.035 mm (3.8189-3.8203 in.)
Maximum 97.060 mm (3.8213 in.)
Front Differential Case:
Outer Diameter (Part A):
Standard 103.929-103.964 mm (4.0917-4.0931 in.)
Minimum 103.850 mm (4.0887 in.)
Outer Diameter (Part B):
Standard 96.929-96.964 mm (3.8161-3.8175 in.)
Minimum 96.850 mm (3.8130 in.)
Front Differential Side Gear Thrust Clearance:
Standard 0.17-0.26 mm (0.007-0.010 in.)
Center Differential Side Gear Thrust Clearance:
Standard 0.16-0.25 mm (0.006-0.010 in.)
Differential Case Side Bearing Preload (At Starting):
New Bearing:
Output Shaft Preload Plus 31-61 N (3.2-6.3 kg, 7-4 lb)
Reused Bearing:
Output Shaft Preload Plus 20-39 N (2.0-4.0 kg, 4-9 lb)
Differential Side Gear Intermediate Shaft:
Protrusion Length 255.5 mm (10.06 in.)
TORQUE SPECIFICATIONS
Ring Gear Set Bolt 124 N.m (91 ft. lbs.)