Propeller Shaft

SERVICE SPECIFICATIONS
Propeller Shaft Runout:
Maximum 0.8 mm (0.031 in.)
Intermediate Propeller Shaft Runout:
Maximum 0.8 mm (0.031 in.)
Intermediate Propeller Shaft Flange Runout:
Maximum 0.1 mm (0.004 in.)

TORQUE SPECIFICATIONS
Intermediate Propeller Shaft To:
*Center Support Bearing 69 N.m (51 ft. lbs.)
Propeller Shaft Center Bearing To Body 37 Nm (27 ft. lbs.)
Propeller Shaft To Rear Differential 74 N.m (54 ft. lbs.)

* Using a vice to hold the flange, press the bearing into position by tightening down on a new nut and washer to 181 N.m (134 ft. lbs.). Loosen the nut. Torque the nut again to 69 N.m (51 ft. lbs.).