Front

Front Speed Sensor Components:

REMOVAL

Disconnect Speed Sensor:

1. Disconnect Speed Sensor connector.
(a) Remove the fender liner.
(b) Disconnect the Speed Sensor connector.
2. Remove Speed Sensor.
(a) Remove the 4 clamp bolts holding the sensor harness to the body and Steering Knuckle.
Torque: 5.0 Nm (48 inch lbs.)

Remove Speed Sensor:

(b) Remove the Speed Sensor from the Steering Knuckle.
Torque: 8.0 Nm (69 inch lbs.)

INSTALLATION
Installation is in the reverse order of removal.
After installation, check Speed Sensor signal.