Component Tests and General Diagnostics

COMPONENTS FOR REMOVAL AND INSTALLATION

KNOCK SENSOR INSPECTION

1. REMOVE KNOCK SENSOR
(a) Disconnect the knock sensor connector.





(b) Using SST. remove the knock sensor.

SST 09816-30010

Torque: 44 N.m (450 kgf.cm, 33 ft.lbf)





2. INSPECT KNOCK SENSOR
Using an ohmmeter, check that there is no continuity between the terminal and body.
If there is continuity, replace the sensor.
3. REINSTALL KNOCK SENSOR

INSTALLATION HINT: Installation is in the reverse order of removal.