Output Shaft, M/T
SERVICE SPECIFICATIONS1st Gear Journal Diameter:
Minimum 37.526 mm (1.4774 in.)
2nd Gear Journal Diameter:
Minimum 34.512 mm (1.3588 in.)
Runout:
Maximum 0.6 mm (0.0024 in.)
Output Shaft Bearing Preload (At Starting):
New Bearing 0.8-1.6 N.m (6.9-13.9 inch lbs.)
Reused Bearing 0.5-1.0 N.m (4.3-8.7 inch lbs.)
TORQUE SPECIFICATIONS
Output Shaft Lock Nut 123 N.m (90 ft. lbs.)