Differential, Manual Transaxle

SERVICE SPECIFICATIONS
Differential Pinion To Side Gear Backlash:
Standard 0.05-0.20 mm (0.0020-0.0079 in.)
Differential Case Side Bearing Preload (At Starting):
New Bearing:
Output Shaft Preload Plus 0.2-0.3 N.m (1.6-3.0 inch lbs.)
Reused Bearing:
Output Shaft Preload Plus 0.1-0.2 N.m (1.0-1.9 inch lbs.)
Differential Side Gear Intermediate Shaft:
Protrusion Length 255.5 mm (10.06 in.)

TORQUE SPECIFICATIONS
Differential Left Case To:
Differential Right Case 63 N.m (46 ft. lbs.)
Ring Gear Set Bolt 124 N.m (91 ft. lbs.)