Case

Reverse Idler Gear Shaft Lock Bolt 29 N.m (22 ft. lbs.)
Straight Screw Plug (Reverse Restrict Pin) 13 N.m (108 inch lbs.)
Transmission Case To:
Transaxle Case 29 N.m (22 ft. lbs.)
Transmision Case Cover 29 N.m (22 ft. lbs.)
Rear Bearing Retainer 42 N.m (31 ft. lbs.)
Straight Screw Plug 25 N.m (18 ft. lbs.)
No.1 and No.2 Oil Receiver Pipes 17 N.m (13 ft. lbs.)
Transaxle Case To:
Transaxle Case Cover 54 N.m (40 ft. lbs.)
Transmission Oil Pipe 17 N.m (13 ft. lbs.)
Reverse Shift Arm Bracket Assembly 17 N.m (13 ft. lbs.)
Transmission Oil Pump Assembly 17 N.m (13 ft. lbs.)
Transaxle Case Receiver 7.4 N.m (65 inch lbs.)
Control Lever Housing Support Bracket 17 N.m (13 ft. lbs.)
Clutch Release Line Bracket 17 N.m (13 ft. lbs.)
Oil Cooler Elbow 27 N.m (20 ft. lbs.)