Crankshaft Main Bearing

SERVICE SPECIFICATIONS
Main Bearing Center Wall Thickness
Mark 1 1.987 - 1.990 mm (0.0782 - 0.0783 inch)
Mark 2 1.991 - 1.993 mm (0.0784 - 0.0785 inch)
Mark 3 1.994 - 1.996 mm (0.0785 - 0.0786 inch)
U/S 0.25 2.106 - 2.112 mm (0.0829 - 0.0831 inch)

Main Bearing Bolt Outside Diameter
STD 10.76 - 10.97 mm (0.4236 - 0.4319 inch)
Maximum 10.40 mm (0.4094 inch)





TIGHTENING SPECIFICATIONS
Main Bearing Cap To Cylinder Block
1st Pass 39 Nm (400 kg.cm, 29 ft. lbs.)
2nd Pass Turn 90°
3rd Pass Turn 90°