D/F Technical Data

Drive Pinion Preload (At Starting)
New Bearing 1.4 - 2.1 Nm (12.2 - 18.3 inch lbs.)
Reused Bearing 0.6 - 1.0 Nm (5.2 - 8.7 inch lbs.)

Total Preload (At Starting)
Add Drive Pinion Preload 0.4 - 0.6 (3.5 - 5.2 inch lbs.)

Drive Pinion To Ring Gear
Backlash 0.13 - 0.18 mm (0.0051 - 0.0071 inch)

Side Gear Backlash 0.05 - 0.20 mm (0.0020 - 0.0079 inch)

Differential Case Runout (Maximum) 0.07 mm (0.0028 inch)

Companion Flange Runout
Lateral And Vertical 0.10 mm (0.0039 inch)

Drive Pinion Oil Seal Drive In Depth 1.5 mm (0.059 inch)

Side Gear Thrust Washer Thickness
1.0 mm (0.039 inch)
1.1 mm (0.043 inch)
1.2 mm (0.047 inch)
1.3 mm (0.051 inch)

Drive Pinion Adjusting Washer Thickness
2.24 mm (0.0882 inch)
2.27 mm (0.0894 inch)
2.30 mm (0.0906 inch)
2.33 mm (0.0917 inch)
2.36 mm (0.0929 inch)
2.39 mm (0.0941 inch)
2.42 mm (0.0953 inch)
2.45 mm (0.0965 inch)
2.48 mm (0.0976 inch)
2.51 mm (0.0988 inch)
2.54 mm (0.1000 inch)
2.57 mm (0.1012 inch)
2.60 mm (0.1024 inch)
2.63 mm (0.1035 inch)
2.66 mm (0.1047 inch)
2.69 mm (0.1059 inch)
2.72 mm (0.1071 inch)