Steering Gear

GENERAL SPECIFICATIONS
Runout:
Maximum 0.03 mm (0.0012 inch)
Preload:
Turning 0.5-1.7 Nm (4.1-14.9 inch lbs.)

TIGHTENING SPECIFICATIONS
Bearing Guide Nut 25 Nm (18 ft. lbs.)
Gear Assembly Set Bolt:
Bolt A 165 Nm (123 ft. lbs.)
Bolt B 190 Nm (141 ft. lbs.)
Bolt C 165 Nm (123 ft. lbs.)
Pressure Tubes 20 Nm (15 ft. lbs.)
Return Tube 40 Nm (29 ft. lbs.)
Spring Cap Lock Nut 51 Nm (38 ft. lbs.)
Tie Rod End Lock Nuts 55 Nm (41 ft. lbs.)