Refrigerant Pressure Sensor / Switch: Testing and Inspection

1. CONNECT MANIFOLD GAUGE SET
Manifold Gauge Installation/Removal

2. DISCONNECT CONNECTOR
3. SET VEHICLE IN THESE CONDITIONS:
a. Running engine at 2,000 rpm
b. Blower speed control switch at HI
c. Temperature control lever MAX. COOL
d. A/C switch ON







4. INSPECT PRESSURE SWITCH OPERATION
a. Connect the positive (+) lead from the ohmmeter to terminal 1 and negative (-) lead to terminal 2.
b. Check continuity between terminals when refrigerant pressure is changed.

If operation is not as specified, replace the pressure switch.