General Torque Specifications

TORQUE CHART








Oil Pump Torque Specifications



Bolt A: 20 Nm (200 kgf.cm, 15 ft.lbf)
Bolt B: 42 Nm (420 kgf.cm, 31 ft.lbf)

Water Pump Torque Specifications
Water Pump to Cylinder Block
12 mm Head Bolt:
8.9 Nm (78 in.lbs)
14 mm Head Bolt:
24.5 Nm (18 ft.lbs)

TORQUE SEQUENCES

Exhaust Camshaft Bearing Cap Removal Sequence








Intake Camshaft Bearing Cap Removal Sequence








Intake Camshaft Bearing Cap Tightening Sequence





Exhaust Camshaft Bearing Cap Tightening Sequence






Cylinder Head Bolt Removal Sequence





Cylinder Head Bolt Tightening Sequence





Note:
Replace the cylinder head bolts if:
Broken or deformed
Does not meet torque specification
Elongated threads are less than minimum diameter
Standard Outside Diameter: 10.76-10.97 mm (0.4236-0.4319 in.)
Minimum Outside Diameter: 10.40 mm (0.4094 in.)


Main Bearing Cap Bolts Removal Sequence





Main Bearing Cap Bolts Tightening Sequence





Flywheel/Drive Plate Bolt Tightening Sequence

Sequence:

See also: Refer to Diagrams/Exploded Views at component level.