Front

Stabilizer Link

Removal
1. Raise and suitable support the vehicle.
2. Remove the stabilizer shaft-to-stabilizer link nut.
3. Remove the stabilizer link-to-control arm nut.





4. Remove the stabilizer link.

Installation
1. Install the stabilizer link and nuts.





2. Lower the vehicle so the control arms are supported by jack stands.

CAUTION: The weight of the vehicle must be supported by the control arms before the stabilizer link-to-control arm nuts or the stabilizer shaft-to-stabilizer link nuts are tightened. This can be done by lowering the vehicle onto jack stands under the control arms.

Tighten: The stabilizer link nuts to 50 Nm (37 ft. lbs.).