Rear Pads

1. Raise and support vehicle, then remove wheels.
2. Remove caliper pin bolts, then release parking brake lever.
3. Remove caliper from caliper carrier. Hang removed caliper with wire hook to prevent damage to brake hose.
4. Remove brake pads.
5. Reverse procedure to install, noting the following:

Fig. 8 Rear Caliper Piston Adjustment:

a. Using tool No. 09945-16030, or equivalent, Fig. 8, turn caliper piston clockwise to obtain clearance between disc and pad.
b. Torque caliper pin bolts to 16-23 lb. ft.
c. Depress brake pedal five times to obtain proper disc to pad clearance.