Removal and Replacement
Radiator Removal and InstallationRemoval
1. Disconnect negative (-) cable at battery.
2. For A/T, drain A/T fluid.
3. Drain coolant.
4. Remove cooling fan assembly.
5. For A/T, remove A/T fluid cooler inlet and outlet hoses.
6. Remove radiator outlet hose from radiator.
7. Remove condenser bolts from condenser brackets.
8. Remove radiator from vehicle.
Installation
Reverse removal procedures, noting the following.
^ Refill cooling system.
^ After installation, verify there is no coolant leakage each connection.
^ Refill A/T fluid.