Precautions In on-Vehicle Service

Precautions in On-Vehicle Service
When connector is connected to ABS hydraulic unit / control module assembly, do not disconnect connectors of sensors with ignition switch ON. Otherwise, DTC will be set in ABS control module.

Precautions in Hydraulic Unit Operation Check
ABS hydraulic unit / control module assembly function is checked by correct wheel lock / release condition when brake pressure is pressurized / depressurized using SUZUKI scan tool. The hydraulic unit operation check should be performed to confirm the correct brake pipe connection in the following cases.
^ ABS hydraulic unit/ control module assembly was replaced.
^ Brake pipe and/or hose were replaced.