964755 Replacing bulb for reading light

WM 964755 Replacing bulb for reading light

Removing bulb for reading light

CAUTION

Danger of damage to property if bulbs are used or handled incorrectly!

- Risk of damage to bulbs and bulb housing.

-> Switch off ignition and remove ignition key.
-> To prevent short circuits, the load in question must be switched off while changing bulbs.
-> Only bulbs specified in the bulb table may be used.
-> Bulbs with a higher wattage may damage the bulb housing.
-> New bulbs must be clean and free of grease. Therefore, never touch the bulbs with your bare hands. Use a cloth or soft paper when changing bulbs.
-> In certain states, it is compulsory to carry spare light bulbs.





Installation position of interior light, front and rear

1. Carefully unclip cover for the interior light at top and bottom using a small screwdriver.





Unclipping cover

2. Remove defective bulb from the mounting.





Removing bulb

Installing bulb for reading light

1. Insert new bulb into the bulb holder.





Clipping cover into place

2. Position the cover and clip into place.