Installation
InstallationWarning:
Malfunctions of the driver's airbag unit possible! Do not trap the cable of the contact unit. Ensure correct routing!
1. Refit the steering wheel with the wheels in the straight-ahead position or after disassembly with the marking so that the upper spokes of the steering wheel are horizontal.
2. Fit hexagon nut -arrow- with spring washer and tighten to 45 Nm (33 ft. lbs.).
3. Install driver's airbag unit. Use new fastening screws. Tightening torque: 10 Nm (7.5 ft. lbs.).
4. Check horn for operation.