Removal

Removal





Note: The booster pump -1- is removed with the holder -1a-.

1. Switch off ignition.





2. Remove cover -A- from the hydraulic unit.





3. For the removal of the booster pump, carry out the following removal steps:
- Remove suction line -2- for booster pump. Undo pressure pipe on the booster pump -3-. Close the lines and the pump connections with suitable plugs.
- Release plug -4- -arrows- and disconnect. Remove connector housing rearwards from out of the bracket -moving arrow-.
- Undo the three plastic fastening nuts -5- and remove the booster pump -1- with the holder -1a-.