Windshield Washer Pump: Service and Repair

Removing

NOTE: A stuck hose can be pulled off more easily if it is heated with a hot air gun!

1. Remove tank for windscreen washer system. Refer to "Removing and installing tank for windscreen washer system".
Service and Repair

2. Remove hose to the spray nozzles at the tank and turn the pump outlet to the rear.






3. Lift pump upwards out of the rubber sleeve.
4. Pull hose off the pump.

Installing

1. Check rubber sleeve for pump, replace if necessary.
2. Install pump and tank, fill in water and perform a function test.