Differential Mount: Service and Repair

Removing and installing support for final drive





A - Support for final drive

B - Fastening screws

Removal

1. Remove final drive.
2. Unscrew fastening screws and remove support.

Installation

1. Fit support in the correct position (angled side facing upwards).





Information
^ At the beginning of the series, supports with tabs were installed. These supports must be fitted with the tabs facing downwards.





A - Tabs

2. Tighten fastening screws in two stages.

1st stage:

Screw both screws to 5 Nm (3.7 ftlb.).

2nd stage:

Tighten both screws to 65 Nm (48 ftlb.).

3. Install final drive.