Warranty - Reporting OBD II Related Repairs

Group
2

Model
6 Cyl.

Part Identifier
2470

Number
9503

August 31, 1995

Subject:
Reporting OBD II Related Repairs

ATTENTION: Service Manager / Service Technician

Models Affected:
All 1996 911 and 911 Turbo

As of Model Year 1996, all Porsche vehicles are equipped with On-Board Diagnostics, Version Two (OBD II). If a condition develops relevant to exhaust emissions control, the Check Engine" (MIL) warning light will illuminate. All information concerning the fault or faults will be stored in the Fuel Injection ECM (DME).

If an OBD II equipped Porsche vehicle enters the workshop with the "Check Engine" light on, all information from the customer and the vehicle fault memory must be gathered and written down on the OBD II report form. Screen prints from the System Tester 9288 can be attached if available. This report, when completed, must be copied and sent or faxed to:

Porsche Cars North America, Inc.
100 West Liberty Street
Reno, NV 89501 or Telephone: 702-348-3253
Attn. Mark Doan Fax: 702-348-3775

When submitting a claim for an OBD II related repair, a copy of the completed OBD II report form must be included in the documentation for the warranty claim. Additional forms may be ordered using the above-mentioned telephone number.

Important:
Failure to submit the completed OBD II report form along with any OBD II related repair will affect Warranty claim payment!

Care must be taken not to erase information from the control unit memory before it has been recorded on the OBD II report form. If necessary, attach an extra sheet to the report form with any additional information.

Warranty information:

For Warranty claim use:

Labor Operation: Description
OBD II REP Complete OBD II report 30 TU