Relining Top Frame

RELINING TOP FRAME

1. Remove and reinstall top frame as described under sliding roof cover.
2. Remove damaged lining from top frame. Remove remains of old adhesive.
3. Cement Moltoprene strips to the underside of the front and rear top frame cross piece.
4. The top frame lining should, if It is of unperforated leathercloth be joined to the center cram piece with a retaining strip by the seam In the center, Perforated leathercloth should be backed with a plastic sheet and sewn to the retaining strip to make dustproof,
5. Place top frame on the ready-sewn lining so that the seam of the lining locates on the front side of the center cross piece. Cement retaining strips on both sides of the center section. Cement plastic sheet around the underside of the frame, Stretch the lining evenly and cement carefully on the top side, Cut out the corners to avoid overlap, so that the top frame runs satisfactorily in the guides.