Automatic Transmission Brace Replacement

Automatic Transmission Brace Replacement

Removal Procedure

1. Disconnect the negative battery ground cable.
2. Raise and support the vehicle. refer to Vehicle Lifting.
3. Remove the right front tire and wheel.
4. Remove the oil filter adapter.




5. Remove the transaxle brace bolts (1, 3).
6. Remove the transaxle brace (2).

Installation Procedure




1. Install the transaxle brace (2).
2. Hand start the bolts to the engine and to the transaxle.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the transaxle brace bolts (3) to the transaxle.

Tighten the bolts to 43 N.m (32 lb ft).

4. Install the transaxle brace bolts (1) to the engine.

Tighten the bolts to 63 N.m (46 lb ft).

5. Install the oil filter adapter.
6. Install the right front tire and wheel.
7. Lower the vehicle.
8. Connect the battery ground (negative) cable.