Power Steering Pump Pulley Replacement

Power Steering Pulley Replacement (5.3L V8)

Tools Required
^ J 25033-C Pulley Installer
^ J 25034-C Pulley Remover

Removal Procedure




1. Remove the drive belt.
2. Using the J 25034-C, remove the pulley from the pump.

Installation Procedure





Important:
* Never use a hammer to install the power steering pulley.

* The face of the power steering pulley hub must be flush with the end of the power steering pump driveshaft.

Using the J 25033-C, install the pulley to the pump.
1. Install the drive belt.