Cooling System Air Bleeder Pipe / Hose: Service and Repair

Coolant Air Bleed Hose Replacement (RPO LS4)

Removal Procedure




1. Drain a small amount of coolant from the radiator.
2. Reposition the coolant air bleed hose clamp (322) at the coolant air bleed pipe (307).
3. Reposition the coolant air bleed hose clamp (322) at the water manifold.
4. Remove the coolant air bleed hose from the water manifold.
5. Remove the coolant air bleed hose from the coolant air bleed pipe.
6. Remove the clamps from the coolant air bleed hose, if necessary.

Installation Procedure




1. Install the clamps onto the coolant air bleed hose, if necessary.
2. Install the coolant air bleed hose onto the coolant air bleed pipe.
3. Install the coolant air bleed hose onto the water manifold.
4. Position the coolant air bleed hose clamp (322) at the water manifold.
5. Position the coolant air bleed hose clamp (322) at the coolant air bleed pipe (307).
6. Refill the coolant system.