Air Injection Hose/Tube: Service and Repair

Air System:

REMOVE OR DISCONNECT

1. Clamp and air hose to check valve both sides, from cross under pipe.
2. Clamp and air hose to air pump, from cross under pipe.
3. Raise vehicle.
4. Fasteners from air cross under pipe bracket, both sides.
5. Cut cross under pipe near center of oil pan to aid in removal.
6. Cross under pipe.


INSTALL OR CONNECT

1. Cross under pipe. New cross under pipe must be cut similarly to old pipe before installation.
2. Use appropriate length of 5/8 heater hose to join both halves of cross under pipe. Clamp both ends of hose securely with stainless steel clamps.
3. Fasteners to air cross under pipe bracket, both sides.
4. Lower vehicle.
5. Clamp and air hose from air pump to cross under pipe
6. Clamp and air hose from check valve, both sides, to cross under pipe.
7. Check Air Injection Reaction (AIR) system for proper operation.