Manual and Electronic Control (RPO C61, C67)

HEATER CORE (RPO C61 or C67) Removal and Installation




TOOL REQUIRED:

J 37097 Hose Clamp Pliers (or equivalent)

REMOVE OR DISCONNECT

1. Drain cooling system.

Heater Hoses:

2. Heater hoses from heater core, using J 37097.
3. Air mix valve actuator. Service and Repair
4. Retaining screws and heater core cover.
5. Retaining screws and heater core from vehicle.

INSTALL OR CONNECT

1. Heater core into vehicle and attaching screws.

Tighten
^ Screws to 1.4 Nm (12 lb in).

2. Heater core cover and attaching screws.

Tighten
^ Screws to 1.4 Nm (12 lb in).

3. Air mix valve actuator. Service and Repair

Heater Hoses:

4. Heater hoses to heater core using tool J 37097. (or equivalent)
5. Fill cooling system.