Blower Resistors

NOTE: This test is to be performed with the A/C Mode Selector in OFF, the Ignition Switch in RUN, and the Blower Switch in LO.

Wire Colors Resistance
YEL and TAN 2.12 ohm
TAN and LT BLU .69 ohm
LTBLU and DKBLU .26 ohm

Backprobe the connector to the Blower Resistors with the connector still on the resistors, and measure the resistance between the wires listed above. The resistance values are approximate.

^ If resistance is different from the values given, install new Blower Resistors.