74. Third Gear Band Assembly Installation

Third Gear Band Assembly Installation

^ Tools Required

DT-47599 Anchor Bolt Socket





1. Inspect the anchor bolt and the bolt hole.
2. Apply automatic transmission fluid to a new O-ring (65).

Notice:
Refer to Fastener Notice.

3. Install the new O-ring and third gear band anchor bolt (64) using DT-47599.
Tighten the anchor bolt to 167 Nm (123 lb ft).





4. Install the third gear band assembly (16) into the transmission case assembly making sure that the band tangs lock into the servo pin and the 3rd gear band anchor bolt (64).