Crankshaft Balancer Installation

^ TOOLS REQUIRED
- J29113 Crankshaft Balancer Installer

1. Apply sealer to the keyway of the crankshaft balancer.
2. Place the crankshaft balancer into position over the key in the crankshaft.





3. Install the J129113 onto the crankshaft.
4. Pull the crankshaft balancer into position.
5. Remove the J29113 from the crankshaft balancer.





6. Install the crankshaft balancer washer and bolt.
^ Tighten the crankshaft balancer bolt to 103 Nm (76 ft. lbs.).